-
Equipment and Materials 0/6
Essential tools, equipment and materials required to complete the workshop
-
Sewing MachineLecture1.1
-
Other ToolsLecture1.2
-
FabricLecture1.3
-
NotionsLecture1.4
-
ThreadLecture1.5
-
GlueLecture1.6
-
-
Patterns 0/4
Downloadable patterns and instructions for printing and the production of templates
-
Adult BearLecture2.1
-
Bear CubLecture2.2
-
TemplatesLecture2.3
-
Pattern AssemblyLecture2.430 min
-
-
Fabric Cutting 0/3
Cutting and preparing all the fabric pieces
-
Main ColourLecture3.1
-
Applique PiecesLecture3.2
-
Mesh and Chest PieceLecture3.3
-
-
Preparation 0/2
Initial assembly work.
-
The Vent Part 1:Lecture4.1
-
Cheek FeathersLecture4.2
-
-
Applique 0/4
Appliqueing all the small detail pieces onto the bear.
-
General NotesLecture5.1
-
Mouth PieceLecture5.2
-
Nose PieceLecture5.3
-
Eyes, Ears, Nails and Paw PadsLecture5.4
-
-
Ears 0/2
Constructing and fitting the ears
-
Ear ConstructionLecture6.1
-
Ear to Head assemblyLecture6.2
-
-
Head 0/6
Constructing the head
-
Nose AssemblyLecture7.1
-
Nose to Jaw assembly (Snout)Lecture7.2
-
Snout to Head AssemblyLecture7.3
-
Head Bridle ReinforcementsLecture7.4
-
Chin FeathersLecture7.5
-
Head to Chin Feather assemblyLecture7.6
-
-
Head to Neck 0/4
Assembling the head to the neck
-
Head to NeckLecture8.1
-
Neck Bridle ReinforcementsLecture8.2
-
Neck FeathersLecture8.3
-
Head/Neck Assembly to Neck Feather assemblyLecture8.4
-
-
Head/Neck to Back 0/1
Attaching the back
-
Head/Neck to BackLecture9.1
-
-
Head/Neck/Back assembly to Chest Piece 0/2
Finishing and attaching the vent
-
The Vent Part 2Lecture10.1
-
AssemblyLecture10.2
-
-
Front Leg 0/5
Assembling the front leg
-
PawLecture11.1
-
Paw Bridle ReinforcementsLecture11.2
-
Paw assembly to LegLecture11.3
-
Leg assembly to ShoulderLecture11.4
-
Leg Bridle ReinforcementsLecture11.5
-
-
Front Assembly 0/3
Assembling the front half of the the bear
-
LegsLecture12.1
-
Inlet ValveLecture12.2
-
Belly Part 2Lecture12.3
-
-
Buttocks and Tail 0/1
Assembling the buttocks
-
Buttocks and TailLecture13.1
-
-
Hind Legs 0/4
Assembling the hind legs
-
PawLecture14.1
-
Paw Assembly to Lower Hind LegLecture14.2
-
Lower Assembly to Upper LegLecture14.3
-
Leg assembly to hipLecture14.4
-
-
Final Assembly 0/3
Bringing it all together
-
Hind AssemblyLecture15.1
-
Front Assembly to Hind AssemblyLecture15.2
-
FeathersLecture15.3
-
-
Bridling 0/4
Assembling and fitting the bridle
-
Bridle AttachmentLecture16.1
-
Adult BearLecture16.2
-
Bear CubLecture16.3
-
BridlingLecture16.4
-
-
Displaying 0/3
Showing your bear
-
FlyingLecture17.1
-
Ground Display PolesLecture17.2
-
Ground DisplayLecture17.3
-
Fabric
The bear works best when built using relatively heavy 56gsm (1.3smoz; 1.65 oz per sq yd) fabric as it helps with stability when flying them and gives a bit of wear resistance when using them for ground display.
Note:The black and grey fabric used for the polar bear can be lighter weight and taken from your scraps bin. However if you are making a black bear then the dark brown needs to be 56gsm.
Polar Bear
- White: 1.5m (60″) wide x 10.5m (11.5yd)
- Black: 1.5m(60″) wide x 0.5m (0.5yd)
- Light Grey: A4 (Letter) size piece
Polar Bear Cub
- White: 1.5m (60″) wide x 5m (6.5yd)
- Black: 1.5m(60″) wide x 0.5m (0.5yd)
- Light Grey: A4 (Letter) size piece
Black Bear
- Black: 1.5m (60″) wide x 10.5m (11.5yd)
- Dark Brown: 1.5m(60″) wide x 0.5m (0.5yd)
- Light Grey: A4 (Letter) size piece
Black Bear Cub
- Black: 1.5m (60″) wide x 5m (6.5yd)
- Dark Brown: 1.5m(60″) wide x 0.5m (0.5yd)
- Light Grey: A4 (Letter) size piece